LSF
Please Quote
Export
| Add To Quotation | Picture | Product Sketch | Strength | Thread | Pitch | Length | Fully/Half thread | SurfaceFinishing | Material | Operation |
|---|---|---|---|---|---|---|---|---|---|---|
|
NON-BOLTS-GFAl-M6X1-L8-Q-EPAo7-T2 | Aluminium | M6X1 | L8 | Fully Threaded | EP & Anodization 7μm | AL2024 | |||
|
|
NON-BOLTS-GFA4-M4X0.7-L7-Q-EP-T2 | A4 | M4X0.7 | L7 | Fully Threaded | Electropolishing | 316 | |||
|
|
NON-BOLTS-GFAl-M10X1.25-L23-B-EP-T2 | Aluminium | M10X1.25 | L23 | Partially Threaded | Electropolishing | AL2024 | |||
|
|
NON-BOLTS-GFAl-M10X1.25-L24.4-B-EPAo7-T2 | Aluminium | M10X1.25 | L24.4 | Partially Threaded | EP & Anodization 7μm | AL2024 | |||
|
|
NON-BOLTS-GFAl-M10X1.25-L29-B-EP-T2 | Aluminium | M10X1.25 | L29 | Partially Threaded | Electropolishing | AL2024 | |||
|
|
NON-BOLTS-GFAl-M10X1.25-L18.4-B-EPAo7-T2 | Aluminium | M10X1.25 | L18.4 | Partially Threaded | EP & Anodization 7μm | AL2024 | |||
|
|
NON-BOLTS-GFAl-M10X1.25-L21.4-B-EPAo7-T2 | Aluminium | M10X1.25 | L21.4 | Partially Threaded | EP & Anodization 7μm | AL2024 | |||
|
|
NON-BOLTS-GFAl-M10X1.25-L27-B-EP-T2 | Aluminium | M10X1.25 | L27 | Partially Threaded | Electropolishing | AL2024 | |||
|
|
NON-BOLTS-GFA2-M6X1-L15-Q-SBa-T2 | A2 | M6X1 | L15 | Fully Threaded | Sand Blasting 2.5μm| 304 |
|
| ||
|
Grade 4.6 | L8 | Fully Threaded | E-Ni-Plating | S15C | |||||
|
|
Steel | L10 | Fully Threaded | E-Ni-Plating | S12C | |||||
|
Grade 4.6 | L16 | Fully Threaded | Black | S15C | |||||
|
|
NON-BOLTS-LZ10.9-M20X2.5-L95-B-GMTa-T2 | Grade 10.9 | M20X2.5 | L95 | Partially Threaded | Geomet 1440h | - | |||
|
|
NON-BOLTS-LZ10.9-M20X2.5-L80-B-GMTa-T2 | Grade 10.9 | M20X2.5 | L80 | Partially Threaded | Geomet 1440h | - | |||
|
|
NON-BOLTS-LZ10.9-M24X3-L80-Q-GMTa-T2 | Grade 10.9 | M24X3 | L80 | Fully Threaded | Geomet 1440h | - | |||
|
Grade 4.6 | L6 | Fully Threaded | Black | S15C | |||||
|
Grade 4.6 | L10 | Fully Threaded | Black | S15C | |||||
|
Steel | L8 | Fully Threaded | E-Ni-Plating | S12C | |||||
|
Steel | L12 | Fully Threaded | Cr-Plating | S15C | |||||
|
CARBURIZING CASE HARDEN 0.05-0.15 DEEP; Hv450-500 0.5kgf | L13 | Fully Threaded | E-Ni-Plating | S15C |