NetWeight | 0.00152 |
Standard | ZZ.JZ06 |
Strength | CARBURIZING CASE HARDEN ; Surface Hardness 53-62HRC;Depth 0.10-0.23mm,Core Hardness 28-38HRC |
Thread | #8 |
Pitch | - |
ShankLength | 0.5in |
Fully/Half thread | Fully Threaded |
SurfaceFinishing | Zn-Plating Blue 48h |
Material | SWRCH22A |
Additional | - |
Drilling screws-Building.ASME Modified Truss Head Phillips Fine ... |
---|
A材料 | |||
美标 | 日标 | 国标 | |
执行标准 | SAE J403 | JIS G3507 | / |
牌号 | 1018~1022 | SWRCH22A | / |
B&C&E 成型 | |||||||||
单位:mm | 法兰直径 | 头径 | 槽深 | 槽号 | 头厚 | 法兰厚度 | R角 | 小径 | 大径 |
规格 | dk | B | Q | M | H | U | R | d | D |
#8-18 | 11.1-11.8 | 6.8-7.2 | 1.9-2.4 | 2# | 1.9-2.3 | 1.0-1.4 | 1.5-1.8 | 2.95-3.10 | 4.09-4.22 |
单位:mm | 牙距 | 钻尾直径 | 钻尾长度,Z | 最小破坏扭矩 | 标称长度 | 总长 | |||
规格 | P | Y | No.2 | No.3 | TS,KG-CM | L,in | L,mm | ||
#8-18 | (1.41) | 3.3-3.5 | (5.13) | 48 | 1/2 | 12.7±0.76 |
D热处理 | |||||||||
表面硬度 | 渗碳深度 | 芯部硬度 | Min折弯角度 | 执行标准 | |||||
HRC | mm | HRC | ° | / | |||||
53-62 | 0.10-0.23 | 32-40 | 5 | ASTM C1513 |
F表面处理 | ||||
涂层种类 | 中性盐雾 | 膜厚 | 执行标准 | 备注 |
/ | h | μm | / | / |
蓝白锌 | 48 | / | ASTM F1941 | / |